UX et KeyQuick Options

[antoinepierre]

************************************************************
Édité après ce premier post : je vous ai mis le mode d'emploi complet de KeyQuick en bas de cette page et un tutorial ici.
************************************************************

Au cas où...

J'essaie de faire un résumé sur ce qu'il est possible de faire avec le clavier de l'UX et je bute encore sur de petites choses.
J'ai déjà trouvé des threads sur Cliésource mais ils ne sont pas très détaillés.
Le mode d'emploi de KQ me laise perplexe...

- comment simuler un clic sur l'écran, ce qui permet de sortir d'un DA. Actuellement, je me contente de tapoter l'écran du bout de l'index, il devrait être possible de faire mieux.

- comment configurer KQ pour obtenir Yes, No, Done, Cancel etc...J'ai l'impression que la solution doit être dans KQ/extent/control Tap Pref mais où ??

- à quoi sert le tiret qui apparait parfois en bas à droite de l'écran lorsque l'on clique sur "Tab" ou "Ctrl" ?

- à quoi servent les DA KeyQuickF0, F1,...F7 ? que se passe t il si on les supprime ?

Un peu HS : peut-on charger l'UX par le port mini-USB, ça ne donne rien chez moi.

[uncle enzo]

J'avoue que je suis loin d'être un power user de KeyQuick, mais je vais quand même essayer de répondre à certaines de tes questions:
- Je n'ai pas de réponses pour tes deux premières questions (ça commence bien).
- Je n'obtiens pas le tiret dont tu parles lorsque j'utilise KeyQuick. Tu peux me dire dans quelle application tu as constaté ce phénomène pour que j'essaye aussi.
- Je n'utilise qu'un seul KeyQuickDA et il permet d'afficher le SideMenu (pas très utile puisqu'il est possible de le lancer via un boutton).
- le mini-port USB sur l'UX50 ne permet malheureusement pas à ma connaissance de transmettre du courant (valable aussi pour les appareils photos SONY).

[antoinepierre]

Pour le tiret en bas à droite : Je l'obtiens en cliquant sur "Ctrl" dans Agenda, dateBk, adresses, taches.

Je pense retirer toute la suite des DA de KQ et voir le résultat.

Dalauncher : j'avais vu que l'on pouvait obtenir la liste des DA par un double clic ou clic long sur le "T".

TelViewDA m'occasionne un soft rest systématique.

Call look up DA m'oblige à être en 320x320 pour en sortir.

TodoDA ne s'ouvre pas.

Certains DA se ferment normalement avec "back", sur d'autres ce bouton "back" m'envoie sur la page d'ouverture (home). Sur d'autres encore, je suis obligé de tapoter l'écran.

En bref : les DA et l'UX, c'est pas l'osmose !

[uncle enzo]

8O Je trouve ton jugement un peu sévère.
OK l'UX50 est peut-être incompatible avec certains DAs (j'avoue ne pas utiliser et n'avoir jamais utilisé sur mes anciens Palms les DAs que tu cites), mais avec d'autres c'est un vrai plaisir :
Par exemple avec CoolDA et KeyQuick je peux à partir du clavier uniquement effectuer toutes les fonctionnalités offertes par le DA. Ceci est vrai aussi pour d'autres DAs comme calescheDA, MisosiruDA, NetconnectDA, Password DA.

D'accord avec toi, la possibilité de sortir du DA par pression d'une touche serait un plus (mais bon donner une tape sur l'écran ne demande pas un effort surhumain )

[antoinepierre]

8O Je trouve ton jugement un peu sévère.

Ce n'est pas bien sévère, il faut ajouter que j'ai passé pas mal de temps à tenir à jour un dossier sur les DA ce qui fait que le sujet m'interesse.

Par exemple avec CoolDA et KeyQuick je peux à partir du clavier uniquement  effectuer toutes les fonctionnalités offertes par le DA.

C'est vrai et très agréable.

Ceci est vrai aussi pour d'autres DAs comme calescheDA, MisosiruDA, NetconnectDA, Password DA.

Je m'en vais les essayer !

D'accord avec toi, la possibilité de sortir du DA par pression d'une touche serait un plus (mais bon donner une tape sur l'écran ne demande pas un effort surhumain  :wink: )

Et la beauté du geste ? .
Lmame sort des DA en cliquant sur "BS", action sans résultat chez moi.


Pour ce qui est de charger par le port mini-USB, tu es le deuxième à me dire que cette opération est impossible. Brando (shop.brando.HK) me dit que oui, j'ai un doute. J'ai testé l'UX relié à son seul port mini-usb, pas d'effet sur la charge de la batterie.

[uncle enzo]

Et la beauté du geste ?  :wink: .
Lmame sort des DA en cliquant sur "BS", action sans résultat chez moi.

Intéressant... De mon côté, j'obtiens le même résultat que toi (principalement même résultat que d'appuyer sur la touche home). Je vais tenter aussi de mon côté de me pencher sur le manuel hermétique de KeyQuick, à deux on va peut-être y arriver

Pour ce qui est de charger par le port mini-USB, tu es le deuxième à me dire que cette opération est impossible. Brando (shop.brando.HK) me dit que oui, j'ai un doute. J'ai testé l'UX relié à son seul port mini-usb, pas d'effet sur la charge de la batterie.

J'ai beau avoir cherché sur le site de brando, je n'ai pas trouver un tel produit. Le produit 2 en 1 qu'ils proposent permet uniquement de se passer du cable de sync mais en fait il s'agit d'un cable d'alim se terminant par 2 plugs l'un se branchant sur le miniUSB pour l'hotsync et l'autre sur la base d'alim.

[antoinepierre]

Ca y est !!, j'ai trouvé comment quitter un DA avec élégance. . Je remercie Lmame et ce thread :? , parce que tout seul, je patinais un peu .

Admettons que tu décides de quitter les DA avec Ctrl+i (fonction inopérante dans les raccourcis de série):
- KeyQuick/extent-> cliquer sur "Add" -> un cartouche apparait :"please push...tap)." -> appuyer sur le I.
- la fenêtre "KeyPref" apparait avec TgtKey : i, cliquer sur "Ctrl", cliquer assign: "Function", cliquer sur : "Trial of DA stop"
- cliquer sur : OK.

ET, CA MAAAARCHE ! ! ! :h J'ai honte d'avouer le temps que j'ai pu passer à essayer de trouver cette configuration.

[antoinepierre]

Pour les curieux, voici le mode d'emploi complet de KeyQuick Pour le lire, cliquer sur "citer". KeyQuick Ver.1.3.1 README

Copyright© 2003,2004 Hiroaki Imazeki All rights reserved.


* 1. Introduction
* 2. About the Demo Version
* 3. Legal Stuff
* 4. Notes on Use
* 5. Installation
* 6. Uninstallation
* 7. Usage
* 8. Customization
* 9. Default setup
* 10. Limitations
* 11. Developer Contact Information


1. Introduction

KeyQuick is the program which is easier to use the keyboard function of OS5
loading CLIEs, such as PEG-TG50, and extends it (*1). A basic function (the
menu and jog operation by the cursor key) can be immediately used now by
turning ON a function after introduction.

Moreover, it is also possible for KeyQuick to perform various extension in
accordance with the input style of an application or a sentence which sets
up the following items and is using them usually besides basic
operation.

- Assignment to a key, or starting according an application/DA to a simple
launcher.
- Operate edit by the scroll method or the cursor key like the keyboard of
PC.
- Mode change when pushing combination keys, such as Ctrl, (lock function
etc.).
- The side menu function which registers the function used well and is
called in pop-up form.

(*1)
When a setup is changed, the application which becomes unstable also has
operation and it may become the situation which carries out worst
hard reset.@So you need to backup all data?using MSBackup or other apps
before testing.


2.About the Demo Version

The programs in this package are being made available as shareware for $10.00.
You can try out this demo version for 30 days after KeyQuick being
initially installed in your PalmOS device. To continue using the program, please send
payments through Handango.

-> http://www.handango.com/


Upon payment, the registration key will be made available for download.
Upon installing this key in the PalmOS device, program restrictions will be
removed. Registration status can be viewed in the KeyQuick "About" screen.



* Notice before payment.......
The KeyQuick interrupts the internal process of PalmOS, and changes
keyboard function etc.. So, there are some application that cannot
work well with KeyQuick. And I have no assurance for working on the future
PalmOSes and applications, too.


3. Legal Stuff

- All rights for the programs contained within this package belong to the
KeyQuick developer (Imazeki Hiroaki, imazeki@jade.dti.ne.jp)
- The programs contained within this package are to be distributed as
shareware.
- The developer bears no responsibility for any losses incurred with any
use or non-use of the programs contained within this package. Furthermore,
the developer may not be required to resolve any issues that may surface.
- Send bug reports and requests to the developer by email.
- It is prohibited to alter anything in the PRC file.
- Consult beforehand with the developer before distributing the programs
contained in this package.
- Except for articles to be used in magazines, consult beforehand with the
developer before writing about this software .


4. Notes on Use

- Operate by CLIE(OS5.x) with a built-in keyboard.


5. Installation

- Please take out KeyQuick.prc from the downloaded file and introduce on
CLIE by HotSync etc. In addition, KeyQuick.prc is the Japanese message
version. Both functionally, although there is no difference, in the case
of the Japanese version, a 2 byte character label sets up by the initial
cofiguration of label selection etc.

- In order to start a side menu from DA, please introduce KeyQuickDA.prc
similarly.

- When a function is assigned to DA, please introduce KeyQuickF0-7.prc
similarly.
(It is stored in the DAs folder.)

- When you start DA, please introduce DAHelper.prc similarly.

- When you use an audio remote control function, be careful of the following
points.

When it is the model to which the hard remote control device is not
attached (TG50 etc.), KeyQuick creates the virtual remote control library
(KeyQuickRmcLib) which becomes instead of hard remote control, after
completing activity-ization.
In order to make AudioPlayer recognize this library, it is necessary to
introduce in the order of the following.

- Please remove the check of "Enable Background Play" with the setting
menu of AudioPlayer in advance.
- If you remove, please introduce KeyQuick and perform activity-ization.
- Finally please attach the check of AudioPlayer again.
- Above, a library is recognized from AudioPalyer.

In addition, after completing recognition once, the check of AudioPlayer
can perform stop and activity-ization, attached.

When you have already introduced in the state where the check is attached by
AudioPlayer, please re-start AudioPlayer and attach a check again, after
removing the check of AudioPlayer. Or the same is said of soft reset.


6. Uninstallation

It can delete from the deletion menu of a home (or CLIELauncher) screen
like a usual application. However, when you are the model to which the
hard remote control device is not attached (TG50 etc.), before deletion,
please remove the check of "audio remote control support" from the setting
menu of KeyQuick, and perform soft reset. Unless it performs this work,
the virtual remote control library (KeyQuickRmcLib) which KeyQuick created
is not deleted.

When you deleted before removing a check, and a virtual remote control
library remains, please introduce KeyQuick again and carry out the
above-mentioned work.
(After a trial employment period end can carry out this work)


7. Usage

7-1. Activation
Run KeyQuick from home screen, and tap "ON" button.
KeyQuick stays, and changes keyboard function you set.

7-2. Deactivation
Run KeyQuick from home screen, and tap "OFF" button. KeyQuick stops working.

7-3. Extension of Basic Operation
If KeyQuick resides permanently by "7-1. Activation", compared with a
standard state, the following operations will be attained from a Jog or
keyboard. In addition, basic operation can be used in the state of
the initial cofiguration immediately after KeyQuick introduction, even
if it does not perform a setup described by "8. extension of the function
by customize."

- Jog Extention.
"Control tap" starts with holding Jog. The button currently displayed on
the screen can be tap by operation of Jog.

* A conflict with other already introduced permanent residence system
programs may occur. In such a case, please change one of setup.
In order to set a Jog repeat setup of KeyQuick to None, it can set up
by carrying out the tap of "EasySetup" button.

- Dialogbox Extention.
When a dialog box is displayed, except for some dialog boxes to which the
list display etc. is carried out, buttons, such as OK, can choose by Jog
push or the new-line of a keyboard.

- Control tap function.
It is the function which chooses the button mainly displayed on the screen
by operation of a keyboard.
Please think a function which was like button selection of a dialog box
moving by TAB key in the case of usage, and choosing Windows by new-line.
(At KeyQuick, a selection item moves with cursor)

- A display of a side menu.
A side menu is a menu which registers in advance the function used well
and calls it in pop-up form. From a side menu, it can perform adding the
application under operation to a functional pause list etc.In addition,
a side menu is displayed by a push of a keyboard of Alt+Tab or
Ctrl+CapsLock, or Capture button.
* Assignment of a starting key, edit of an item, etc. can be performed
from "Easy setup" of a main screen. In addition, please refer to
"8-3. Assignment of Function " about the details of a function.

- Operation of a menu.
The menu which carries out by having pushed Ctrl+M and is displayed from
a menu button or a keyboard is operated vertically and horizontally with
cursor like the keyboard of PC(At CenterJog device, it is a Jog+LR button),
and can be chosen by new-line.

- Command tool bar.
If a slash is written to the upper right for Graffiti area from the lower
left or Ctrl+T is pushed from a keyboard, a command tool bar will be
displayed. The icon of a tool bar can be chosen now by pushing Ctrl+T
Ctrl+R and Ctrl+E.

- Cursor keys.
Although Ctrl+ cursor upper and lower sides, a new-line, and BS can perform
the emulation of jog operation also in the usual state, on the screen which
omits edit of a title list of a memo pad etc. when KeyQuick resides
permanently, the same effect as having operated the jog can be acquired by
the thing which pushed the cursor vertical key etc. independently and to
do, without carrying out simultaneous aggressiveness with Ctrl.

- KB100 + CLIE Organizer exception handling
Some exception handling is added to CLIE Organizer.
Item delital of Datebook tab
- A Jog push and a new-line are the tap of the OK button.
- It is the input of a new-line character by Ctrl + new-line push.
- It is the start to a control tap by the cursor key up or down.
- Operation extension of time and the date dialog.
Address tab
- It shifts to an edit screen in a Jog push or a new-line on an item
display screen.
- It moves to an order item by the cursor up or down on an edit screen.
ToDo List tab
- ON/OFF of the check [ at the time of item selection ] by Jog push.
- It is edit of an item by new-line at the time of item selection.
- Decision of the edit at the time of item edit by new-line. It is the
input of a new-line character at Ctrl + new-line.
Etc.
- Addition of the object button of a control tap.
(It limits to what can be operated)

8. Customization

The initial state of KeyQuick is set up by improving a little portion so
that a keyboard may be made to use without changing operativity greatly
from a usual state. In addition to this basic setup, in KeyQuick, customize
which matched according to use environment can also be performed in
accordance with the input style of an application or a sentence currently
used usually.

The chapter by which each details are described to be item explanation below
is described. In addition, about some items, the category at the upper right
of a screen can be set up now by changing to "Extend". Moreover, since
a setup which has realized basic operation of KeyQuick for "9. Default setup"
is described, please make it reference also here.

- Customize of a key.(Extent)
each key -- it is an item for setting up assignment of starting of an
application, a control tap function, etc. individually
Please refer to "8-1. Customize of keys" - "8-4. Screen tap" chapter from
for details.

* The target keyboard device is KB100(JP) or built-in.
Moreover, KB100(JP) has some restrictions.

- Customize of a function.(Extent)
A control tap, a launcher, etc. are the items for performing operation
about the function which mainly has a screen interface, and registration of
an item.
Please refer to "8-5.Control tap operation setup" - "8-7.launcher setup"
for details.

- Customize of a side menu.(Extent)
Although it is one of the functions basically, there is explanation about
the grade which registers and calls other functions and to which the
button (VoiceRec) of the device side etc. is assigned, and a setup united
with some features.
Please refer to "Assignment of function" amd "8-8. Side menu setup" for
details.

- UI setup.
A setup relevant to a keyboard at large, such as enabling the lock of
the mode (combination mode) of the key used combining other keys, such as
Ctrl, can be changed.
Please refer to "8-9. UI and system setup" for details.

- System setup.
It is an item for adjusting the functional restriction matter of KeyQuick
etc. Usually, although it is not necessary to change, when setting up the
validity of an audio reproduction remote control function, and the
non-effect, it uses.
For details, please refer to ". interface and system 8-9 Setting" chapter
as well as the above.

- A setup of a color.
It is the item which sets up the color of the indicator which expresses
the color of the function which mainly has a screen interface, the lock
states (a character, background, etc.) of a combination key, etc. like
customize of a function.
Please refer to "8-11 Setup of color" for details.

- Function DA Settings.
It is an item for assigning the function of KeyQuick to DAs. Functions,
such as a "control tap", can be treated as DA.
Please refer to "8-12. Function DA Settings" for details.

8-1.Customize of keys.

each key on a keyboard -- individually, in order to perform assignment of
operation etc., the tap of the "additional" button on the main screen of
KeyQuick is carried out, the item of the list which newly specifies a key
or is registered beforehand is chosen, and the tap of the "edit" button is
carried out Thereby, Key setting screen is displayed, and when it combines
with a key, Ctrl, etc. which were specified, it can specify what operation
is assigned to the key.

* There are the following restrictions in KB100.
- The key which operates it to the input field cannot be changed.
for example, It is the Ctrl+C(copy),Ctrl+curosor keys,delete key etc.
- Assignment which is different in the key combination to which
the same operation is assigned.
for example, It is the Ctrl+Tab and Ctrl+P key etc.
- A key with a special function cannot be changed, either.
for example, It is the Ctrl+K key etc.
- A key may not be recognized to add a key when a driver is in
a sleep state.

- None.
Usual operation is performed.

- Key.
Operation of other keys can be specified. However, in the case of the key
combined with ShiftFnAlt, only combination of the same key can be chosen
(execution).
For example, f+Alt cannot be specified to be a+Fn. When it specifies, f is
inputted even if it pushed and carries out a+Fn.
However, in the following cases, it can perform as an exception.
- When the combination mode of an interface setup pushed the key
simultaneously and usually bends by except. f+Alt is inputted, when
saying in the upper example and a is pushed and carried out, after having
changed into the state where Fn was pushed and detaching.
- If it says in the upper example (in the case of the key arrangement of
TG-50) when a check is put into a setup by the character and it specifies
a direct input character, when "[" (character inputted by f+Alt) will be
specified. However, this method cannot be used when it cannot specify in
written form.

- Launch.
Starting can be assigned to a key by specifying the application or DA
displayed on the list of a screen.

- Function.
The function in which some were reserved can be specified.
Please refer to "8-3 Assignment of function" for details.

- Ctrl direct tap.
By specifying "OK" label etc. currently displayed on the button etc.,
assignment which carries out the tap of the button can be performed.

- Screen tap.
The method of carrying out the tap of an arbitrary position or the cursor
position can be assigned.
Please refer to "8-4. screen tap" for details.

- Sentence.
Sentence is inserted in the input field. Moreover, when starting in @,
it is changed as follows.
@TS -> Time Stamp
@DS -> Date Stamp
@DTS -> Date and Time Stamp



Moreover, will be pushed in the situation that the character will not be
inputted if a check is put into "Priority Ctrl out of the field" on
this screen. For example, although it will operate as a jog while [which
pushed the vertical key on the memo pad ] displaying "list, if it carries
out if this check is put into the vertical key of cursor, on an edit screen,
function" becomes possible as cursor.

8-2. Contents of Display of Customize List

The customize list of keys on a main screen shows the following contents
as a character attribute.

- The situation of checking to "Priority ctrl out of the field."
"-" is displayed, when checking and C is not carried out.

- Independent or the situation of the assignment when Ctrl Shift Fn and Alt
combining and pushing.
None is -,Key is k,Launch is L,Function is F,Ctrl direct tap is T,Screen
tap is S is displayed.

For example, when displayed as "CapsLock C -F---", it means that a check is
"Priority ctrl out of the field", and a function is assigned and shines to
CapsLock+Ctrl.

8-3. Assignment of Function

The functions (launcher etc.) of KeyQuick can be used by assigning the key
on each keyboard from Key setting screen called by "8-1, Customize of keys"
Moreover, registering with the below-mentioned side menu can also use it
(a part of function cannot be registered to a side menu).

The following is the category and its contents of a function.

- KeyQuick extension.

It is a function for KeyQuick extending the function which is not carried
as standard to a system.

- Clock.
While pushing the key, a clock is displayed on the screen lower right.
When it registers with a side menu, it becomes the entry which displays
the present time on a list item.
(It does not perform, even if it chooses an item from a side menu)
- launcher.
The program registered in advance is displayed in the center of a screen,
and carries out cancellation stripes by starting, BS, or the pen tap by
the cursor key etc.
- Control tap.
The control (button etc.) currently displayed on the screen is chosen
with cursor etc., and carries out cancellation stripes by the tap, BS,
or the pen tap in false.
- Trial of DA stop.
If it becomes DA, it is possible to make it end by [ which is completed
by carrying out the tap of the outside of a screen ] using this function.
- Last appl launch.
The application in front of one can be started and it can return.
However, unlike the end of DA, the state of an application is not held.
Moreover, an argument etc. is not reproduced. For example, when a word
is searched with a reference function and a schedule is started as the
result, a reference result is started, without being reflected.
- Recent application.
The history of the application started even before eight is displayed.
Moreover, starting from a history like a launcher is also possible.
- Combination release.
The state of the combination set up by "8-10 Mode change of . combination
key" is canceled. In addition, when you use this function, please set
it as each combination, such as ctrl.
- Side menu.
It is the function which registers the function in advance and can be
chosen from a pop-up list at the time of a side menu functional call.
Only this function can be assigned the buttons (VoiceRec, jog, etc.) of
the deveice side besides a keyboard.
However, a side menu cannot be registered into a side menu.

- System standard.

It is the function currently assigned to the keyboard by TG50 at the
standard, and is the function which is not assigned in NX/NZ. It uses,
when assigning like TG50 by NX/NZ.
In addition, there is a function which is not supported by the model.
For example, battery information is not displayed in NX.


- ATOK(Japanese FEP).

The pop-up function of ATOK etc. is called. In addition, if it calls when
there is nothing, if ATOK is effective, since a soft keyboard will start
or a character will be inputted, be careful of this function.

- ATOK menus 1 and 2.
It is the menu which in the case of Graffiti area loading machine is
displayed when the tap of an alphabetic character or the number keyboard
is carried out.
- ATOK decision undoing.
The menu function of ATOK is called and the conversion decided immediately
before is changed into an again convertible state.


- Field operation.

Cursor operation in the domains (field) for edit, such as a memo pad, etc.
is extended.
For example, cursor can be made to jump like HOME key in the keyboard of
PC (for it to be movement etc. to the head of the sentence) (or selection).

Moreover, a zoom function can change the size of the font of the field
under edit one by one from Tiny to LargeBold. However, this change is
temporary and is returned to a default next time at the time of edit
(if it depends soft, having scrolled may even return).


- Audio remote control.
It is a function for operating the remote control correspondence apparatus
of AudioPlayer. In order to use this function, there are the following notes.
- When it is the model to which the hard remote control device is not
attached (TG50).
The check needs to be attached to "audio remote control support" of a
setting menu, and "Enable Background Play" of AudioPlayer. In addition,
since the turn which attaches a check becomes important, please unite
and refer to "4.Instaltion."

- When it is the model to which the hard remote control device is
attached (NX/NZ).
The check needs to be attached to "Enable Background Play" of AudioPlayer.

* Also by the case of applications other than AudioPlayer, when using remote
control, when a setup is required, it is necessary to carry out same
operation.

In addition, two or more functions accompanied by a screen display cannot be
started simultaneously. For example, a clock cannot be displayed while
displaying the launcher.


8-4. Screen Tap

The tap method of an arbitrary position or a cursor position can be
registered into the key on each keyboard from Key setting screen called by
"8-1. Customize of keys".

- Coordinates.
The position (the number of dots) from the upper left or the lower left
of a screen is specified, and the tap of the screen is carried out.
In addition, the number of dots makes breadth of a screen 160 dots.

- Cursor position.
When cursor is displayed during edit on the memo pad etc., the tap of
the position is carried out. Moreover, a double-tap can also be performed
if a check is attached. Usually, if a double-tap is carried out,
the word of a cursor position will be chosen.

* By some device, it is the relation of pen coordinates calculation accuracy,
and coordinates and an actual screen position may shift. This will become
still remarkable if adjustment of a digitizer has shifted. Moreover, if the
tap of the cursor position of the character with narrow width (for example,
blank) is carried out with Tiny font, a cursor position may shift.


8-5. Control Operation Setup

In order to specify the operation key of the "control tap" of a function
etc., it can carry out by carrying out the tap of the "control" button on
a main screen. For example, if the tap of the "front" button is carried
out on the displayed setting screen, the key for moving to the control
(button) before one can be specified.

The key which can be set up becomes below.

"Prv" It moves to a previous item.
"Nxt" It moves to a next item.
"Sel" Selection of an item.
"Can" Release in the mode.
"Ext" A selection object is extended to the item in a table.

Moreover, if it checks to "Vertical direction", the operation key can
also be specified.

If a Init label is set up, the button chosen at the time of mode start
can be set up. Specification is divided by ":" and obtained two or more
lines.
(It is deleted when : is set as the character sequence last which a new-line
and : cannot set up)


8-6. Menu Operation Setup

In order to specify key operation when the menu is displayed on the screen,
it can carry out by carrying out the tap of the "menu" button on a main
screen. Moreover, by the key specified with the command bars 1-3 of this
screen, the tap of the icon of the command tool bar displayed on the screen
lower part can be carried out. In addition, it corresponds to the icon
displayed on the rightmost from the command bar 1.

For example, if KeyQuick becomes in the state of a default when DALauncher
is working, DALauncher can be started by pushing Ctrl+t twice.


8-7. Launcher Setup

In order to specify the operation key of the "launcher" of a function etc.,
it can carry out by carrying out the tap of the "functional setup" of the
list which carries out the tap of the "launcher" button on a main screen,
and is displayed.

- Hold mode.
It fixes, where a launcher screen is displayed. The program chosen when all
keys will be detached, if this check was removed is started. Please think
that those who use Windows do operation which resembled operation of
Alt+Tab.

- An Item up, down, left, right, select, cancel.
The key which performs each operation is specified.

- Start key.
Operation of the key (the function was assigned) which started the
launcher is specified.
For example, when it is set as
"assigning a launcher to CapsLock+Alt",
"the check in the hold mode being removed", and
"being the item right about the key which started",
If CapsLock is pushed, pushing and carrying out Alt, a launcher
will start. If CapsLock is repeated and pushed then, item selection
will move to the right. And if Alt is detached, the item chosen at
the time will start.

* When it starts from a side menu, it becomes the key which started
the side menu (ignored when a side menu is started from side buttons other
than a key).

Moreover, the program displayed on a launcher can be edited by carrying
out the tap of the "program" of a pop-up list. In addition, the maximum
number which can be registered is to eight pieces in the present condition.


8-8. Side Menu Setup

In order to specify the "side menu" operation key of a function etc.,
it can carry out by carrying out the tap of the "Pref 1" or the "Pref 2" of
a list which carries out the tap of the "side menu" button on a main screen,
and is displayed.

"Pref 1" sets up the starting method, a display setup, an item selection
key, etc. Moreover, by performing a setup or KeyQuickDA of a side button,
it can also start from other than a keyboard.
"Pref 2" sets up the key for choosing an item directly. About a basic setup,
it is the same as that of a launcher etc.

However, there are some exceptions in operation of a side menu.
- When started from a main part side button or KeyQuickDA, it always
operates in hold mode irrespective of a setup.
- When started from the button of the main part side, a setup of a start
key is disregarded.
- Even if the function of audio reproduction remote control chooses an
item except a stop, don't end a menu. Moreover, while being chosen with
the key or the button, rapid-traverse operation is performed like real
remote control (continuation aggressiveness cannot be performed with a pen).
- About the zoom of the field, although a menu is once ended, a menu is
again displayed after the completion of zoom processing.
- When the clock function is added, nothing is performed, even if the
present time is displayed on the registered list item and it chooses an
item.

Moreover, assignment comes to be deterred, while long aggressiveness
usually comes to operate as aggressiveness and VoiceRec, CLIECamera,
and CLIECameraS are operating, when [ of capture or VoiceRec ] it usually
assigns aggressiveness.

In addition, the character displayed on a side menu is using the standard
font as the bold in soft. When the board font is already made thick with
a certain means, please remove the check of a false board. Now, it comes
to display using the bold font of a system.

The item displayed on this side menu can be edited by carrying out the
tap of the "menu item" of a pop-up list. However, the "side menu" itself
cannot be registered into a side menu.


In addition, the maximum number which can be registered is to 12 pieces
in the present condition.


8-9. UI and System Settings

If the "option" of a menu, "UI setup", or "System setup" is chosen,
a general setup of KeyQuick can be performed. The following items can be
set up in the present condition.

"UI Settings"

- Scroll on PgUp/Dn .
It can set up whether cursor is also united and moved in scroll operation
of Alt+cursor up and down of a keyboard.

If cursor movement is chosen, although cursor will also move, X position in
a movement place surely becomes the head of the sentence. Selection of
X position maintenance holds X position as much as possible like scrolling
on PC. However, although a response falls [ both of the modes ], X position
maintenance falls more. Moreover, if it scrolls by methods other than keys,
such as scrolling, in the position when one sentence is straddling two
lines and cursor moves to the head of the 2nd line, cursor will move in
the end of the 1st line. This is restriction of the standard field parts
for a system which it does not restrict to scroll operation.

- Horizontal scrolling of NetFront.
When the horizontal scroll bar is displayed on the screen of NetFront,
it can set up so that it may scroll with cursor.In addition, when a focus
is on the edit field, it becomes the usual cursor movement.
Moreover, NetFront may have a focus in the field which is not displayed
on a screen. It is cursor movement usual also in this case.

- OK of the dialo by Enter.
When a dialog is displayed, it can set up whether the tap of the buttons,
such as "OK"(*1), is carried out by new-line. In addition, the target dialog
changes with selected modes.

(*1)OK:Yes:Continue is the target button.

-Alert
The alert of a system(check at the time of a communication start etc.)
is the target dialog.

-Dialog
The state which does not have a focus in the field of multi lines
at the usual dialog box. Furthermore, a dialog is applicable when the
application has not carried out the mask of JOG push.

-Max
By the usual dialog box, the dialog which does not have a focus in
the field of multi lines is applicable.

When this mode is set up, if the target dialog is displayed, a button
will be expressed as a thick frame, and it will be chosen if a enter
is pushed. Moreover, it shifts to a control tap function by
the right-and-left(*2) key of cursor or right-and-left(*2) key of front jog,
and it also becomes possible to carry out the tap of other buttons.

(*2)It becomes the key specified to be "Prv" and the "Nxt" by
ControlPrefs of a main screen.

- Combination mode.
The mode when pushing Ctrl etc. is set up. Please refer to "8-10. Mode change
of combination key" for details.

"System Settings."

- Function restricts during ARM appl
If the check is attached to this item, a "function" and a "side menu" of
key assignment will not operate. Replacement of other keys etc. operates.
ARM application points out the application built in ARM code to user
interface portions, such as HotSync and NetFront etc. The application which
carried out ARM coding of a part of operation is recognized as a usual
application.

In addition, although, as for a "function" and a "side menu", NetFront etc.
operates also in operation by removing this check, fault may occur
according to environment.


- Audio remote control support.
This item is expressed as the model (TG50) to which the hard remote control
device is not attached.
Please attach the check, in using an audio remote control function from
an applicable model.


- Tap compatibility with Ver.1.0.
Please check this item, when a control tap etc. does not operate.

- Stops during PicselViewer.
While two or more permanent residence type programs are working,
as for PicselViewer for UX50, a speed of operation may fall. In this
case, if this item is checked, it may improve.
* While PcselViewer is working, all operation of KeyQuick stops.
* When you end PcselViewer, please cancel Shift lock etc. by
the function of a system.
* It may not be improved depending on the number of permanent residence
of other programs.

- System residence priority.
When KeyQuick resides in a system permanently, it is a priority for
receiving information from a system side. usually -- although it is not
necessary to change -- other permanent residence systems -- please be a
setup of an application etc., and when influence appears in either,
change Condition may be improved. In addition, although a priority becomes
high, since the one where a number is smaller has
[ that it is various and ] the method of permanent residence, as for thi
s priority, it does not necessarily receive information ahead of other
applications.


"Function suspend."

"Priority is Ctrl out of the field."etc. of a Key setup may carry out a
conflict to operation of an application. A setup is suspensible if
an application and item is then chosen from this item.


In addition, "Ctrl lock pause" item can be set up for every kind of key.

- Char & sign It suspends, when an English character and a sign are pushed.

- Nums It suspends, when an Nums are pushed.
- Cursor It suspends, when an Arrow and Enter,BS are pushed.


8-10. Mode Change of Combination Key

By setting up the "combination mode" of a UI setup, operation of keys,
such as Ctrl, can be changed as follows.

- Stick.
- When a combination key is pushed once.
Next, a combination is confirmed to the pushed key and a combination is
canceled.
- When a combination key is pushed twice.
A combination is locked. It cancels by pushing a combination key again.


- Change.
A lock and release are changed when a combination key is pushed.

In addition, in addition to the mode, the bar which expresses a state to
Graffiti shift indicator upper part of a system usually comes to be
displayed. Moreover, in PEG-UX50, the state of Ctrl is also displayed on
a status bar.
* Display the state inside KeyQuick apart from a system about Shift.

Moreover, there is the following sub setup item.
- Pop indicator.
When the mode of a combination changes, a state is displayed in the
center of a screen.

- Cancel by the other combinations key.
When a key different from the combination key locked now is pushed,
it is once canceled, without moving to the mode of the key.
For example, it will be canceled, if ctrl is pushed and shift is pushed.

- FEP mode on a status bar.
The state of Japanese FEP is displayed on the place where the shift
of a status bar etc. is displayed in PEG-UX50. In addition, in order
that KeyQuick may perform this display unlike the indicator of a system,
even when ATOK is being used, ordinary "Japanese Hiragana a" is displayed.
Moreover, it is displayed as "Japanese Hiragana a" also by the case of
other FEP or a language.

8-11. Setup of Color

If "Function Color" or "Indicator Color" is chosen from the option of
a menu, a setup about the color of KeyQuick can be performed.
In addition, penetration processing is digested using the color to which
the clock etc. was set here.


8-12. Function DA Settings

A setup will be the function assigned to KeyQuickF0-7 possible if the
"Option/Function DA Settings" of a menu is chosen.
For example, a "control tap" is started by starting KeyQuickF0 by assigning
a "control tap" to the first item. In addition, the function started from
Function DA operates like the time of being started from the side menu via
KeyQuickDA.
* A clock function cannot be assigned.


9. Default Setup

The degrees of KeyQuick introduction direct are the following setup.
Please make it reference of customize.

- Customize of a keys.
BS -> Priority ctrl out of the field.
It combines with Fn and is BS operation usual to the time.
Tab -> Priority ctrl out of the field.
It combines with Ctrl and, sometimes, is a control tap
function
It combines with Alt and, sometimes, is a side menu function
Return -> Priority ctrl out of the field.
It combines with Fn and is Return operation usual to the time.
Up -> Priority ctrl out of the field.
Donw -> Priority ctrl out of the field.
CapsLock -> Priority ctrl out of the field.
It combines with Ctrl and, sometimes, is a side menu function.


- Control operation setup.
It is mode cancellation at item selection and BS by movement between
control, and new-line in the cursor keys.
When the key (a default un-setting up) which started the control tap
function is pushed,it moves to the following item.
The Jog operation by the center Jog device is right-and-left movement.

- It is mode cancellation at item selection and BS by movement between
selection items, and new-line in menu operation setting cursor.
In each key and the combination of Ctrl, it is icon selection of a command
tool bar.

- Check in the launcher operation setting hold mode.
It is mode cancellation at item selection and BS by movement between
selection items, and new-line in cursor.
When the key (a default un-setting up) which started the launcher function
is pushed, it moves to the following item.

- The program is not registered in the initial value of a program list.

- Side menu Pref 1.
It checks to the hold mode, a false hold, and an icon display of an
application.
It is mode cancellation at item selection and BS by movement between
menu items, and new-line in the cursor upper and lower sides.
When the key (a default un-setting up) which started the launcher function
is pushed, it moves to the following item.

- Side menu Pref 2.
The following keys are set up and direct selection of an item is required.
"q" "w" "e" "r" "t" "y" "u" "i" "o" "p" "a" "s"

- Side menu item list.
The following items are registered.
"Menu" "Command bar" "PowerOFF"
"Play" "Stop" "FR" "FF" "VlumeDown" "VolumeUp"
"Function suspend" "Clock"

10. Limitations

- Some application doesn't work well with KeyQuick since it
interrupts the various internal process of PalmOS to replace keyboard
function. Therefore, it is expected that the situation that input
operation etc. does not function normally occurs.

#Warning:
It is the reason for the trouble that KeyQuick interrupts and change
the PalmOS itself.
So you don't send questions for the author of the application about this.

- Simultaneous aggressiveness of three keys.
In hard, although it seems that the combination of Ctrl+Shift+a is possible,
it is not supported by KeyQuick.

- When the key of a small letter is assigned.
Even if it assigns a character independent key to the combination of a key
which replaces the inputted characters, such as Shift, it does not function
normally.
For example, even if it assigns a key to Shift+a, in the state which Shift
pushed where it was carried out, Caps function works and not a but A is
inputted. a key should assign for avoiding this, please come out, check
"CharSet", and specify a direct input character

- Screen update at the time of a control tap.
Update of a screen is not performed at the time of the control tap mode
of a function.
For example, starting of this function stops a display of a clock on
the screen of an application which shows the clock.

- Two or more startings of a function.
Two or more startings of a function are not supported. For example,
a clock function cannot be used while displaying the launcher function.

- The number of support of a command bar icon.
The icon displayed on a command bar is counted from the right, and supports
only the icon to the 3rd.

- At the time of KeyQuick screen display
When the screens (setup etc.) of KeyQuick are displayed, even if a setup
of KeyQuick is turned on [ it ], all assignment and functions are suspended.

- Replacement of Ctrl,Shift,Fn and Alt.
Replacement of the above-mentioned key and assignment to other keys cannot
be performed.

- Color palette.
The color of the window which KeyQuick displays may collapse in the state
of using color palettes other than a standard in the game etc.

- Light lighting of a key.
Even if it pushed and carries out the key customized by KeyQuick, a light
may not light up.

- The priority which resides permanently to a system.
since KeyQuick has lowered the priority for hooking an event by th
e default -- other permanent residence systems -- replacement of a key etc.
is carried out after an application hooks an event When influence appears
in either in other setup and operation of an application, condition may
be improved if the priority which resides permanently is changed. Refer to
"8-9.UI and the system Settings" for the change method.

- Operation immediately after soft reset.
That KeyQuick starts permanent residence to a system opens time not the
time of reset but a little (about 2 seconds), and it is performed.
Therefore, the case where extension of a keyboard is not effective is
immediately after completing reset.
Even in such a case, if time is set several seconds and operation is
started, a setup will be reflected automatically.

- Control tap extension mode.
Scrolling of an item cannot be performed although the item in a table
serves as an object in the extended mode. Only the item currently displayed
on the screen is an object.
Moreover, a screen top has the case where the table is uniquely drawn by
some application, even when it is a table and is visible to a table.
In this case, it cannot choose.
For example, although an one day display of a DateBk will be a table,
since a week display is not a table, it cannot be chosen.

- The indicator of Shift display.
A display of the indicator of Shift which KeyQuick draws takes time a
little until it changes.

- Fault in the internal error of AudioPlayer, and the application which uses
other remote control.
From the model (TG50) which does not carry remote control in hard, the above
problems may occur by the affinity with a virtual remote control library.
In this case, please remove the check of "audio remote control support"
with the setting menu of KeyQuick, and carry out soft reset. Although the
audio remote control function of KeyQuick is suspended by this work,
a virtual remote control library is deleted and an error is avoided.

- Affinity with the application with the original input field.
When the ornament and classification by color of a character are being
performed in the input region, standard not parts but original input field
parts for OS may be used. In this case, the range selection function of
KeyQuick may not work normally.

- The thick frame of "OK of the dialo by Enter"
The thick frame of the object which can be chosen by enter is
displayed as a mark. Therefore, re-drawing etc. is not performed.
Moreover, it has judged in the state at the time of a dialog display start.
When a state changes after a display, even if the thick frame is not
displayed, OK may be able to be chosen by enter.For example, it generates
in the progress dialog of CLIE Mail etc.


- KB100 sleep
When a driver performs a key input in a sleep state (state where a key input
is not performed several seconds), it is immediately after it. The function
assigned to KeyQucik may not operate. For example, it is the control tap of
Alt+Tab etc. In order to correspond to this, when seeming a sleep state and
Alt+Tab is inputted. Time to push Alt is lengthened a little. And please
push Tab.


- Others
There might be other unknown remaining issues.


10. Developer Contact Information

To send email, please use:
imazeki@jade.dti.ne.jp

Email address and other information is available in the developer's home page:
]http://www.jade.dti.ne.jp/~imazeki/palm/

[uncle enzo]

Merci pour le lien vers les excellents tips de Lmame. Je me rends compte que j'utilisais Keyquick au 1/10eme de ses possibilités. Bravo pour ta persévérance !
Un truc bizarre pour ton dernier message, le "manuel" de Keyquick que tu mets en copie n'apparaît que lorsque tu cliques sur "citer". Sinon j'ai un grand blanc en-dessous de ta première phrase ???

[antoinepierre]

Pour le manuel, c'est normal, j'ai mis size=0 . Si un anglophone adepte de babelfish veut s'amuser...

J'ai encore d'autres usages pour KeyQuick. Accroche-toi, ça vient !

[erwan]

Pour les curieux, voici le mode d'emploi complet de KeyQuick  :lol: Pour le lire, cliquer sur "citer".

Excellent !

[MarieC]

8O moi, avec Safari, je le vois en entier (et j'ai mal à la main à force de scroller )

Toinou, tu veux à tout prix faire plaisir à olivier101, toi